We specialize in Custom Engineering and Fabrication. We are known for our High End Quality and attention to detail. All of our products are hand made in house. Many hours were spent perfecting these pieces to ensure you get a great quality product at a reasonable price. Our welds are High End Quality and are stainless steel. We can make just about anything happen.
Built strong, built to last!!!
All of our products are hand made and are considered custom and made upon order! They do take time so please understand that with your wait time upon purchase. Normal wait time is about 2 weeks. When extremely busy could be anywhere from 2-7 weeks. Plan ahead and purchase ahead. Upon purchase there are no refunds since they are custom pieces that are made upon purchase. Thanks - ESP
Picture below shows the high quality SS welds.
We are proud Sponsors/Vendors for the below Websites and Forums.
Our First Mentioning of Us (Explicit Speed Performance) was in July's 08 issue of Honda Tuning Magazine with a stuning beautiful Honda Prelude Cover Car. Hopefully a sign to come with many more mentionings...
We ESP were mentioned again in the recent Feb/March 2010 Honda Tuning Magazine Issue on a beautifully modded 95 Honda Accord for our ESP CD Accord Motor Mount. :)
Our site has changed but our products and quality hasn't. Just check the tabs on the right for our product inventory.
We are Certified Sponsors/Vendors on www.CB7tuner.com , www.CD5tuner.com and www.H22squad.com . We also are highly recognized on Honda-Tech.com.
Top End USA's (ESP DA H22A Motor Mount Kit)
745 whp and 492 ft lbs of torque
at 35 psi race gas BW S372 turbo
Videos of it on the dyno: Copy Paste:
This is a pull at 15psi
http://videos.streetfire.net/video/TOPENDUSA-DYNO-test-RUNS_694091.htm
This is a quick snap of the turbo still spooling after the engine is shutdown
http://videos.streetfire.net/video/TOPENDUSA-DYNO-RUNS-3_694099.htm
For the ladies or for those brave men! We do offer Neon Pink Powder Coating :) It's very bright.
Installed on a 500 hp BB6 97-01 Prelude. 1/8 mile times were improved says the owner :)
Owners exact feedback:
"Thanks so much for the amazing traction bar... I got it the day before Import Faceoff and my mechanic said it was the easiest part hes ever installed on a car... especially my pain in the rear prelude haha... I just wanted to send you a couple pictures to show you! He was very worried I wouldn't have clearance for the front mount torque because he already had to remove my front motor mount but we had about 1 inch of clearance from my downpipe haha so it worked perfect! Excellent product!! Thank you again!! oh and the pink matched my valve cover perfect :) I think the traction bar helped me to get my 7.6 eighth mile time! I ran an 11.93 quarter mile but I have never run the prelude in a quarter mile before then so I can't tell you if it helped for that but I'm sure it did! anything can help a 500 whp boat of a prelude. "
Purchase Information:
Hello feel free to contact us with any questions regarding our products or would like to make an order. We accept 2 forms of payment either Paypal or US postal money order and International.
Contact info:
Phone # 1-360-866-8530 Ask for John
Email: ExplicitSpeed360@aol.com
AIM: ExplicitSpeed360
PayPal ID: ExplicitSpeed@aol.com
Please add 3% to the listed price on our site for Paypal fees or I will have to request it before product is shipped out.
If we do not have a product in stock no worries, turn around time is between a week to 2 weeks.
Thank you, - John
Our popular products are our:
Honda/Acura Motor Mount Kits, Honda/Acura Traction Bar Systems, Honda/Acura 2,3, and 4 point Strut Bars, H22/H23/F22/F23 Alternator/Tensioner kits. We also have you H2B people covered for Alternator/Tensioner kits. Check out our inventory on the tabs on the left.
Our ESP chassis ID chart:
EF = 88-91 Civic/Crx Hatch/Crx/Sedan
DA = 90-93 Acura Integra 2 and 4 door
EG = 92-95 Honda Civic 2 and 4 door and Hatch
DC = 94-01 Acura Integra 2 and (4 door DB)
EK = 96-00 Honda Civic 2 and 4 door Non SI
EM1 = 99-00 Civic Si
BB = 92-01 Honda Prelude
CB = 90-93 Honda Accord 2 door and 4 door
CD = 94-97 Honda Accord 2 door and 4 door
What's new:
March 9, 2010
The EG/EK/DC Traction Bar System with Front Torque Mount Kit for Hydro B Motors is finished and ready to be ordered.
Please check out our ESP Traction Bar System page for further information.
December 15, 2009
The 88-91 3rd Gen BA Prelude H22/H23/F 5 spd Motor Mount Kit is finished and ready to be ordered.
Please check out our ESP Motor Mount Kit section for further information.
October 28, 2009
We will be releasing in the next 4 weeks the 88-91 3rd Gen BA H22/H23/F 5 spd Motor Mount Kit.
Please check out our ESP Motor Mount Kit section for further information.
September 22, 2009
We are releasing the 88-91 Civic/Crx Cable B Trans B Series Motor Mount Kit 5 spd. For USDM and UK Cars.
Please check out our ESP Motor Mount Kit section for further information.
August 29, 2009
We will be releasing the 88-91 Prelude All Models ESP 2/3/4 Point Solid Strut Bars. They are ready to be purchased.
Please check out our 2, 3, and 4 Point Pages for further information.
March 19, 2009
We released the BB 92-96 and 97-01 Prelude Front and Rear Lower Strut Bar/Skid Plate.
Please check out our 2 Point Page for further information.
December 17, 2008
We are releasing the BA 88-91 Prelude Traction Bar System with Front Torque Mount Kit for B20/1 Motors or H/F Motors. ABS models too. Clears AC on B20/1 and H/F Motors.
Please check out the Traction Bar System Page for further information.
September 9, 2008
We are releasing the CB 90-93 Accord 4 Point Rear Upper Strut Bar.
Please check out our 4 Point Rear Upper Page for further information.
January 12, 2008
We are releasing the CB7 92-93 ABS model Traction Bar System with or without Front Torque Mount Kit.
Please check our Traction Bar System page for further information.
December 20, 2007
We are releasing the EG/DC/EK H2B, H2D, F2B, F2D Front Torque Mount Kit Traction Bar System.
Please check our Traction Bar System page for further information.
September 24, 2007
We will be releasing the EG/DC H22A motor mount kit and EG/DC H/F Front Torque Mount Kit Traction Bar System
Please check our Motor Mount Kit page and Traction Bar System page for further information.
July 9, 2007
We will be releasing the EF 88-91 Civic/Crx Traction Bar System with either D or B series Front Torque/Mount Kit.
Please check out our Traction Bar System page for further information
June 18, 2007
We will be releasing the 94-97 Honda Accord F and H series Motor Mount Kit for 5 spd cars as well as Auto to 5 spd conversion. Also a kit for those staying Automatic
Please check out our Motor Mount Kit page for further information
June 11, 2007
We will be releasing the 5th Generation 97-01 Honda Prelude Motor Mount Kit for both Base and Type SH models.
Please check out our Motor Mount Kit page for further information
May 9, 2007
We just released the DA 90-93 Acura Integra 2 door and 4 door B series Front Torque/Mount Kit Traction Bar System
Please see the Traction Bar System page for further information
March 24, 2007
We just released the CD 94-97 Honda Accord Traction Bar System with or without the Front Torque/Mount Kit.
Please see the Traction Bar System page for further information
March 8, 2007
We just released the EG 92-95 Civic and 93-97 Del Sol D and B Series Motor Mount Kits. 5 spd cars. We also released the DC/DB 94-01 Acura Integra B and D Series Motor Mount Kit. 5 spd cars.
Please see the Motor Mount Kit page for further information
February 21, 2007
We just released the CB7 90-93 Honda Accord 5 spd F/H Series Motor Mount Kit as well as the Auto car to 5 spd transmission mount. Also Automatic Motor Mount Kit.
Please see the Motor Mount Kit page for further information
December 12, 2006
We have released the CB7 90-93 Honda Accord (All Models) F and H series Traction Bar System...
Please see Traction Bar System page for further information
November 14, 2006
For our customers and in the name of PoWeR we have came out with a 4-2-1 H22A header. We just made 200 whp and 168 ft lbs of torque with this header.
Please check out the H22A 4-2-1 Header page for further details...